R7M — BMW Cradle Compatibility (Nav Prep 5/6 & Keyless Electric)
R7M — BMW Cradle Compatibility (Nav Prep 5/6 & Keyless Electric)

Supported cradles

1) BMW Nav Prep 5/6 (with key lock, no front buttons)
Also known as the BMW Navigator mount for Nav V/VI. It’s the OEM “navigation preparation” base that powers and talks to accessories via the pogo-pin connector. Units with the simple, button-free bezel are the right type for R7M.

2) New keyless electric BMW ConnectedRide Mount (motor-driven latch)
The latest “electric/keyless” mount used on 2024–2026+ models (BMW part no. 65 90 5 B6C 8C0). It locks/unlocks electronically instead of using a mechanical key. R7M fits the mount interface.


Not supported

Any BMW cradle with physical buttons on the bezel
Examples: the older 4-button Navigator cradles. If you see +/− or page icons molded into the left edge, that is a buttoned cradle and not compatible with R7M. 


How to identify your cradle in 10 seconds

  • Look for buttons.
    Buttons = old 4-button cradle → not supported.
  • Look for a key barrel.
    Key lock on the side and a clean, button-free bezel usually indicates Nav Prep 5/6supported.
  • Listen/feel for motorized clamp.
    If it opens/closes electrically and has no key, that’s the new keyless electric mount (65 90 5 B6C 8C0) → supported.
  • Pogo-pin pad in the center.
    Both supported cradles have the BMW pogo-pin contact block that carries power/data.

Notes

  • “Navigation preparation” is BMW’s term for the bike-side base. R7M attaches and is powered by this prep the same way a Navigator or ConnectedRide accessory would be. 
  • Aftermarket/clone cradles can differ internally; only OEM BMW cradles are recommended. (See BMW OEM part listing for the keyless mount as a reference.) 

Quick FAQ

Q: My mount has front buttons but I won’t use them—will R7M work?
A: No. Buttoned Navigator cradles are a different hardware family and are not supported by R7M.

Q: Is the “ConnectedRide Cradle” the same thing?
A: BMW’s ConnectedRide Cradle is a phone holder that also clips onto the bike’s navigation preparation. We reference it here only to show how BMW names the prep; R7M uses the same prep type, but it is not a phone holder.

R7M
15 comments

Se puede instalar en la BMW R1250RT DEL AÑO 2023??
GRACIAS

Antonio Aleman Lemes

Votre système est il compatible avec support origine bmw r1200r de 2017. Merci pour votre réponse

Michel Fontaine

Me informa si es compatible con la BMW R1200RT modelo 2014.
Y di requiere algun adaptador o complemento. Gracias.

Mario Rhojo

Se puede montar en una Ninet Scrambler 2023?

Alejandro Arandia

Le queda a una 1250 GS modelo 2022

Eduardo Simon hidalgo
Leave a comment