Controlling Your Action Camera with R7M - Insta360/GoPro/DJI Supported
Controlling Your Action Camera with R7M - Insta360/GoPro/DJI Supported

The R7M comes equipped with integrated Action Camera Control, allowing you to capture every moment of your ride without ever having to fumble with your camera mid-ride. By syncing your camera directly to the R7M interface, you can manage recordings and toggle modes while keeping your focus firmly on the road.


Supported Action Cameras

Insta360: X5, X4, X4 Air,ACE PRO, ACE PRO2
GoPro: HERO 10, HERO 11, HERO 12, HERO 13
DJI: Osmo Action 6, Osmo Action 5 Pro, Osmo 360

Note: The R7M can only pair with one action camera at a time. Simultaneous connection to multiple cameras is not supported.


Use Cases

Why Control Your Camera from R7M?

  • Hands-Free Operation: Start recording without reaching for your camera—keep both hands on the handlebars for safer riding
  • Capture Key Moments: Quickly snap photos or start recording when approaching scenic routes or memorable riding experiences
  • Helmet/Chest Mount Convenience: No need to remove your camera from hard-to-reach mounting positions to change settings
  • Group Rides: Seamlessly document your journey without stopping or fumbling with camera controls

Features & Limitations

What You Can Do:

  • Start/Stop recording
  • Take photos
  • Adjust camera settings
  • Switch recording modes

Important: The R7M provides control-only functionality. Live preview is not supported—you cannot view camera footage on the R7M display.

Action Camera Control with BMW Wonder Wheel

For riders using the R7M on a compatible BMW motorcycle, the Wonder Wheel (Multi-Controller) offers an even more seamless way to manage your camera. Once you have entered the Action Camera Control interface, you can navigate the menus without taking your hands off the grips:

  • Short-Tilt Multi-Controller Left/Right: Navigate the cursor.
  • Press Direction Reset Button: Confirms selection.

Pairing Instructions

  1. Power on the camera and enable wireless/remote control mode
  2. Keep the camera close to the R7M during pairing
  3. On the R7M, navigate to camera settings and select your camera model
  4. Follow on-screen instructions to complete pairing

Troubleshooting:

  • Reset network/connections on the camera if pairing fails
  • Restart both devices and try again
  • Stay on the pairing page—connection will drop if you navigate away
R7M
10 comments

Kan man ista 360 x3 verbinden?

Esaltato Salvatore

Kan man ista 360 x3 verbinden?

Esaltato Salvatore

EN UN FUTURO SERA POSIBLE DE CONECTAR INSTA 360 X3?

MIGUEL

Kann ich eine Insta360 one RS mit dem Ridernav steuern? Mir gelingt keine Verbindung?

Oliver

se podrá conectar a insta x3 ya que la dji osmo action 4 no viene en el listado y si conecta

miguel
Leave a comment